Well, that may be fine for reading a document, but when you are a Scripting Guy with lots of people with whom to meet, and lots of blogs to write, suffice to say, the Protected View does not work. Sure, I can click Enable Editing , but that is just annoying.
This view is shown in the image that follows. Luckily, Windows PowerShell 3. If you do not have Windows 8, you can still use the technique from that post to unblock files. It works great even if the Scripting Wife did accuse me of breaking her computer. To unblock all the files in a folder, I first use the Get-ChildItem cmdlet to return a list of FileInfo objects from the directory, and then I pipe them to the Unblock-File cmdlet. Because I am changing system state modifying a potentially great number of files , I want to first ensure that the command does what I want it to do, so I use the WhatIf parameter.
This is shown here. That looks like exactly what I want to accomplish, so I remove the WhatIf parameter and run the following command. Like I said, nothing returns. So I need to perform a test to see if the command worked. I open my HSG-Template. That is about all there is to unblocking files with Windows PowerShell 3. It I delete the stored stream I can add the stream but then I only have the one stream to choose from.
Found a work around. While playing the stream you can save it as a playlist. This is very annoying. The app does not even give any feedback. Hi, When I add song to a playlist, the behavior is different when file is local or from a dlna server : when file is from Dlna server, only the filename is displayed.
All I can do is to stop playing a stream! All I can do is to stop playing a stream. Why there is no close or quit button? At this time it plays one song then stops. Also, is there a way to just have it go onto the next folder? All songs from a CD are placed in individual folders at this time. Make sure you highlight that. To play music at random, click on the crossed arrows at left to highlight that icon. To go back to single play, click at right until you see the number 1 in a box and click arrows at left to de-highlight.
Good luck. Jrpa am not sure why this cannot be simplified to the extent that it is for example on a desktop where you click on an option that says play folder. I expected to be able to record audio using VLC on Android,nothing fancy just song ideas on guitar. I use VLC on Windows for this function all the time. U know ive pretty much let it slide that developers dont acknowledge android so much,,but for this,,,,this!!!!
How do you get back to the drop down menu that gives you the options to delete audio history that is on the left side of app when opened somehow cannot find it anymore? Hello, how can I add a group of files or folders to a playlist?
Thank yoy! Any help in transfering the files without requiring the use of a PC would be appreciated. You can either use the cloud like Dropbox, or email them to yourself, or use an app like Send Anywhere File Transfer which is available for both Android and iOS. The one where you push a button to turn on network sharing.
We can use gestures to somewhat control some features like brightness, seek in the currently playing video and changing the volume. I need to use a multimedia remote to control the playback. However, it seems that no one is working after i have tried several wireless USB remotes. Which key can do 3 seconds backward? If you can show me the whole operation key table mapping , it is appreciated. Do we have a table for this kind of key mapping?
Can i adjust subtitle speed with two buttons, by external keyboard. If not can i expect it in update? I have VLC 3. Mostly, I listen to audio books. They have many chapters. The books are several hours long. When I reopen the app, I have to hunt for the spot I left. I put all the files in a playlist. How can I configure the app to remember where I left off? When I play, it automatically played at point stop before.
How can I play song at begin? Thank you. Sorry for my English. Anyone know how to remove or change the large orange button on the bottom left of the screen? I hit it by accident while selecting tracks all the time.
I thought it was able to be set to random, replay, next track, etc. Any help would be appreciated. Some of these show up in the artists listing of albums.
Many of them are not listed for the artist but are grouped under an artist listing for various artists as an album called greatest hits will all of them mixed together.
Even though the album name may be the same, the correct and only artist is listed for the individual songs. Why are some listed with the actual artists and others not? How can this be corrected?
I have a computer on my network with a DVD reader. My goal is to be able to run the DVD video content from my tablet. I can indeed reach my shared DVD device as you suggested. I can see the content of my Dvd. You might have disabled the notification privilege that VLC had. I use this app on a android tv player in a store for place marketing stuff. When I turned off the tv, de video that was played will automatically on pause.
VLC on Android. Stream video from an IP camera using. Works the first time. Different IP camera works fine every time,. How to use custom libVLC options? It should be in the audio settings. I have a lot of videos that I have taken and I would like to store them elsewhere, besides just on my phone. Please help. There are three icons in the audio playing portion of of this app the indicate some level of replaying or looping or something. But no where in the instruxtions does it say what each one means.
Please tell us! I want to do that with the app. How do I erase the info regarding server address, username, folder path and port that VLC seems to have saved somewhere? The only solution I can think of is clearing the cache or even data which is like reinstalling VLC all over again. The file browser inside VLC shows icon mode with file names truncated. How can I get VLC to display files in details mode with the full file name?
Hi, is this still the case? I am experiencing the same issue where the file names are truncated. If not, are there any plans to add them?
That would be excellent! I just install VLC. I downloaded many music folders with mp3 files. Under directory, when I select a folder and click on a track, I want it to continue playing until the end of the folder. I forgot to mention the folders have many files so where ever I start, I want to list to all the tracks that follow. Is it possible to get the anaglyphic 3d option on VLC for android? I just installed it on a box that works under android that is connected to my HD projector.
I have not seen this question asked. Hi I have 3 IP cameras which I would to like to view using vlc player. Is it possible to run 3 instances of vlc on android so that I can view all the 3 cameras simultaneously.
You can try the Stream option from the Menu. When playing a mp3 streaming radio station, is there a way to see the metadata artist and song title? I know this station sends this data. It works in Winamp, XiiaLive, etc. When I use VLC on my iphone they have an option where I can have a personalized link so that I can transfer files from my computer to my iphone. You can just browse the folders once you connect it with your computer. Would be great to have a bluetooth auto play feature, similar to the exsiting one for the headsets.
Playback start when bluetooth connect, stop when disconnect. Perfect for in car audio. I do not want that to happen automatically. Any pearls of wisdom on how to stop that auto-start upon Bluetooth connect? I am having trouble with VLC playing back files recorded on my dashcams.
What do you use? VLC Android player for Samsung phone. How do I stop it playing continuous video files? I want it to stop at the end of any current video file being played. Is there an Option to display more than 1 video track? Videos are identified as having, for example, 2 tracks, yet there seems to be no selectable option to view both.
It works on a PC, where the video track can be selected in the video pull-down menu. Thanks in advance. Also, I would like to have the media interface like time stamp, other controls show permanently rather than having to touch the screen every time.
I looked around a number of times and also my phone to see if I can do them but no luck. How on the android version do you get it to simply play an album in track order rather than the loony alphabetical order it keeps defaulting to!! Unless you manually tap and drag the songs around in the album playback screen not the original album listing screen , there is no way to automatically sort songs by track number in the app.
You can get VLC to play audio files stored on your device by renaming the files, adding a track number just after the artist name. As far as I know all players play files in alphabetical order by default so this works with all players. You can also group files by genre by adding a category at the beginning of each file name. Below are the eight categories I use.
Well, I do not think that VLC has the share feature. So, we should actually locate the video file in the local or external storage and share it to whatsapp. We have a tablet we use VLC on to play movies for our children in the car. VLC used to automatically resume playing from where it stopped when we would lock the screen while the video was playing and then come back later and unlock it.
Now it requires us to push the play button to resume playback. Also, with the playlist mode it used to start at the beginning of the next file rather than where the video last left off. Now, if the kids finish one movie but were half way through the next it throws them into the middle of it. Do you know any way to get VLC for Android functioning like it used to?
Thank you! I do not think so. I checked it and the changes that you mentioned is there. Is there a way to make new folders? I do not want all my videos showing up right away when the Videos tab is opened. Can I make a new folder in VLC and hide some away? You will find the options there. Full information in this post. Recent upgrade to v3. When I listen to podcasts I often want to skip a section. I have been doing this using the progress bar at the bottom of the screen.
I turn to landscape mode to get a longer bar and therefore a finer resolution on where I wind up after tapping it. Version 3. I have hunted a lot but can not find a way to turn off this playlist. Can it be done? If not, could it be added to a future rev? Yes, I see that the playlist covers the right half of the screen.
I too cannot find any option to hide it. Hello, Please help, How can I change the setting that the VLC automatically launch and playing music when bluetooth device connecting to my phone? The menu options imply there is casting options, but I can find a way to get it connected to my smart TV.
Anyone know how to do this? Hello, I cant get VLC to find video files when it auto scans. Also, media art does not match audio file for either book or album. VLC is not playing nicely with my Chromecast Audio renderer. Yet when I disconnect the renderer the stream starts playing on my phone.
Thanks for any and all help. Seems something has changed in a newer update. Can you explain where that is? A couple of things I would like to be able to do. You can play these from the video menu, but not the directory menu. The issue here is in the video menu, the VOB are all grouped in the video grouping.
And as all Vobs are the same file name they are hard to find. This could be fixed, if they were found in the directory section under there folder name. Or if we had the play DVD option same as windows desktop. VLC for Android plays a short static burst at the start of opening some mkv files and will hitch before playing it.
The common denominator seems to be that the files have opus audio tracks, but the files play normally in Windows and on Android using alternative players. Have tried disabling hw acceleration to no effect. Hi there. Is there any way to set up a video or piece of media to auto play once the app has started?
Basically I need a video or pic to display once the app has kicked in. And album art displays on the lock screen fine too. Is there some way to stop VLC from trying to generate thumbnails for videos while browsing for files? Everything was fine in the last version 3. My Android App just upgraded to 3. Is this a bug? The equalizer is still there for the audio and video player.
In the audio player, use the three vertical dots option that is available on the absolute top-right in the expanded audio player interface. For me, I open up a song and then drag the entire player from the bottom of the screen. Then there are two of those three dots options button on the top-right area. Use the one that is on the absolute top-right. Screenshot below:. Hi … thanks, that worked! At least I can find it again. If I may, I have a suggestion for the EQ.
I find that moving the EQ band sliders up and down within 0. I always overshoot. Just something to think about in new releases. It used to be that there was no way to go up a level without exiting the App.
I have been banging my head on this one…. Why did they make it so hard to find??? Hi, forgive my ignorance but i have vlc for android 3.
I have some videos that i would like to do a bit of editing on but i cannot find the editing controls. Does vlc for android not have any? Thanks in advance….
Obviously, both can significantly impact performance. Starting with heat acclimation, the function leverages nearby weather stations. This is then shown in the training status widget.
Garmin says that they divide up training vs living altitudes, just as typical studies would. Additionally, adaptation will decay within days depending on acclimation level. DesFit , who has, and kindly lent me his high altitude shot and check out his Edge video , especially for more mountain bike details. What the feature shows is your current altitude adaptation level.
In fact, a pro triathlete friend of mine wrote a guest post here on that very topic some 8 years ago. For the rest of us, we can just use this as a post-ride pub excuse for why we climbed so poorly on our week-long vacation in the Alps. Effectively giving you credit for sleeping at high altitude. Or, at least me. Garmin did note that these are capped though to account for maximum hydration intake limits of the human body. And yes, you can change from ounces to millimeters, as well as the exact size of your bottle even per activity profile setting too!
Note that some of these stats require a power meter like FTP. It then shows you in the dotted line the optimal aka balanced training load bucketing. This is telling you how many hours you should wait until your next hard workout:. And finally, one of the newer metrics not seen on any other Garmin device is Power Curve.
The time duration is selectable as three choices — one month, three months, and twelve months. The weather simply shows the weather for that day of the week that the workout is scheduled.
A watch could fall apart and give you dire electrical shocks while doing so, but if it shows you on the wrong side of the road? Oh hell no, bring on the fury of the internet! GPS accuracy can be looked at in a number of different ways, but I prefer to look at it using a number of devices in real-world scenarios across a vast number of activities.
I use other devices at once, trying to get a clear picture of how a given set of devices handles conditions on a certain day. For example, for watches I try to not place two units next to each other on my wrists, as that can impact signal.
Plus, wearing multiple watches on the same wrist is well known to impact optical HR accuracy. For cycling units, I arrange them on my handlebars using standard mounts — usually one on either side of the step, often a bit separated from each other.
Next, as noted, I use just my daily training routes. The workouts you see here are just my normal daily workouts. This has included workouts in: Amsterdam city, countryside and Mallorca mountains, ocean, countryside , California off-road, hills, forests, seaside. I rode this nearly a month ago, so while this firmware was slightly older, it still shows pretty solid GPS performance. This super twisty-turny route is incredibly difficult from a GPS performance standpoint. There are rock tunnels, huge cliffs next to you, and plenty of GPS-blocking goodness to hose up units as we see the Samsung illustrate.
But I just wanted to show you first the density of trees. In fact, you can see the Samsung straight-up gave up on life half-way through this and just cut the corner entirely.
The other units tracks are actually very close. Perhaps by skill, or perhaps by dumb luck. They did it both directions though. Now I had a quick lunch at the bottom before heading up. GPS-wise, units were fine here. I left them recording on my bike while I ate. Though I did see some elevation issues here were it showed me quite a bit higher in elevation than I really was ft higher than the sea I was sitting next to. And again, that was a month ago on older firmware.
The Samsung…is…well…yeah. This was a nice coastal ride that also went through some gigantic tree forests. Plus it had a couple of rollers and a solid climb mid-way through. Why you ask? It was in my back jersey pocket. I needed to photograph the Edge solo-cup:. But how could I not go to satellite view with scenery like that?
Oh, back in the pocket it went for a climb to get other photos. Why bother including this you ask? Well two reason. This shows you what can happen. It was at least pretty consistent in that when it went into my pocket it went a bit sideways. This ride unfortunately had a lot of that, as we were filming other videos for things that were published prior to this review and thus prior to this embargo.
Though interestingly the Edge seemed to handle the pocketing better than the Edge on this ride. No idea why. And this is actually in the trees a fair bit alongside a highway. As for altitude? Pretty similar overall, however the Edge did seem offset about 18 meters throughout the entire ride. I suspect it got a weird initial fix which is used to then calibrate the barometer. Nobody does anything stupid, so all the tracks look fine from 30,ft.
Note that all of these units are recording at 1-second intervals. The thing with analyzing road bike GPS files, is that they very rarely fail. Seriously, super rarely do units screw it up. That said, time and time again I found the Polar Vantage V off in the water, as seen here. Mind you, this is the exact same GPS chipset between these three units all Sony, and all likely using the same chipset. The difference though is in the modes and power delivery.
Not only that, but the Edge can deliver far more power to the Sony chipset and has more space for the antenna than a wearable. Oh, and altitude on this one? Welcome to the Netherlands. Or at least, the Edge lineup specifically. Again as I noted earlier this is likely more to do with the fact that Garmin has enabled additional GPS modes Galileo , as well as simply has more power it can throw at the GPS chipset than a wearable can. Plus, bike computers have much more room for better antenna design.
You can use it as well for your own gadget comparisons, more details here. Of course, there are plenty more units in the product comparison calculator, so you can make your own charts here as well. Again, remember you can make your own charts within the product comparison calculator here.
Sure, the Edge has a bigger and prettier screen, and the Edge has a touchscreen. And as for the touchscreen, I kinda like the always-works button navigation. One of the arguments for why people often choose Garmin over competitor devices is simply that Garmin has more features.
And both ring true. Love it. Again, there are definitely nits to be made here against the Edge — but I think the feature-set far outweighs those minor inconveniences. With that — thanks for reading! Found This Post Useful? Support The Site! Hopefully you found this review useful. If you're shopping for the Garmin Edge or any other accessory items, please consider using the affiliate links below! As an Amazon Associate I earn from qualifying purchases. Even more, if you use Backcountry.
Super handy for mountain biking where taking your hands off the bars might be a bad idea. This is a set of Garmin magnetless speed and cadence sensors. The Garmin Varia radar alerts you to cars coming up behind you, well before you see them.
It's less useful for city riding. The RVR skips the light. Perfect for a commuter bike. Also, it can transmit XC Skiing Dynamics as well. And of course — you can always sign-up to be a DCR Supporter! Thanks for reading! And lastly, if you felt this review was useful — I always appreciate feedback in the comments below. Your email address will not be published. Required fields are marked. If you would like a profile picture, simply register at Gravatar , which works here on DCR and across the web.
Subscribe me to the newsletter. Notify me of followup comments via e-mail. You can click here to Subscribe without commenting. Unlike my , everything just worked. As far as I was concerned, it was the perfect bike computer. Now after several updates to both the gps firmware and the OS, garmin have bricked some key functions for me. I am very close to joining the many who have left Garmin for wahoo in search of a product that actually works.
Initially my synced up perfectly with my iphone and everything worked perfectly. I never run garmin connect during a ride since its worthless and not worth the battery drain, but text messages and alerts from my iphone showed up on my garmin which is what I wanted. It was annoying as fork that I had to go in and manually set every segment to use the current KOM as the pace, but once i did that everything worked as well as could be expected.
Then garmin did two things that has really messed up strava live. Somehow they made the GPS less accurate with firmware updates. The signal jumps all over the place now so my time moves every few seconds from way faster than pace to way behind pace 30 seconds or more.
This wildly inaccurate jumping highlights the other problem. I have the auto feature turned off. One of the recent updates seems to poorly attempt to add in a universal pace option, and using that I have moved KOM up to the first choice. If anyone has any suggestions on what to fix let me know.
This happened to my Garmin Edge , thus why I am now shopping again! I maintain that feeling to this day. Garmin Aviation equipment is rock solid and the best in general aviation. Garmin sports Has been a market leader due to lack of competition but this is changing. AND your comment has just stopped me from buying an Edge Thank you very much for posting a reply to this review. Photo attached.
Today a similar thing occurred. Cannot connect to Garmin connect anymore. BT connects but the process gets stuck half way through and aborts with error I tried: -Full factory reset the -Deleted the app and reinstall -Reboot phone. It was all fine a few days ago. Does anyone have any thoughts on what is going on?
They are very helpful, and should be your first port of call, unless you are trying to find out how something works, rather than trying to sort a glitch…??? Regarding your notifications.. Then go Smart Notifications and check that at a minimum Text Messages are enabled. You can enable the others if you want. Was racing today looked down at the first mile and my unit was frozen. It surprised me since it has worked great for weeks. So I had to do a hard shutdown then on bootup it gave me a notice of some GPS update for 2 minutes.
I was thinking what great time during a race when I need data. After that it came up and ran fine the whole race, but had me worried for a little while. I keep it up to date so I wonder what this update was. I have been having problems pairing my powertap P1 pedals to the EDGE , even after updating the P1 firmware i still has the screen promt the need to pair the right pedal, and worst the data seems to be only of one side , the left one.
If you have the same issue and maybe also know how to pair de right pedal to the left pedal, please let me know best Erick. It had to do with my unknowingly pairing via bluetooth.
I had to clear that pairing out, and then repair but through ANT. One other step that is recomended is to take the lithium batterys our for at least one minute and re install the batterys before going to the whole process thanks and best ps: the SRAM AXS app is easy to manage.
Finding that the y elevation scale cannot be adjusted is actually a bit disappointing and frustrating…. I am trying to understand if on the is it possible to have climbpro and strava segments I am a premium strava user work together. If I understand correctly, climbpro only works with a route loaded on the Hi, thank you for the great reviews.
I was looking on the Wahoo Elemnt Roam and the Garmin Edge for quite a while now, but finally pulled the tigger on the So far Iam pretty happy.
I created separate activity profiles for my 3 bikes to keep track on mileage and so on. How can I configure the total mileage? Hello — great review. I was wondering what the navigation options are like when the lines are blurred between MTB and road rides. Also how does it behave when not operating with a phone? Of course I miss out on some features but does the garmin still play the game on its own? How does the detect a crash as distinct from just stopping quickly?
Would it perform the same if I ran or kayaked with it? Great review, but the edge has the worst mobile connectivity of any Garmin device. Tried everything for 3 days. Interesting experience…i picked up a while i decide what to do with the i cracked user error. The setup experience for the with activity profiles, data screens, etc. Not super impressed. Totally compatible. In fact, I did a bunch of testing with it last summer. I just got this today… What is most important to me is the mapping.
There was room for a data card, and I uploaded the maps I wanted into the unit. How does the work in comparison? I can select the sensor and the loading icon on the corner right keep loading.
Would you have any suggestion? Did you first pair up the OH1 to your smartphone one-time? The OH1 requires a one-time activation, otherwise it basically just fires blanks which confuse every device out there. As I said way back when, in one of my Polar OH1 posts, it always seemed like an odd move.
No other generic sensor requires that for basic HR transmission. Assumption is that I have activated a route in navigation mode, but am now on the textual data page not watching the map I can see only Distance to go option but not distance to destination.
Is there a connectIQ data field I need to install? How would I go about creating routes and getting from my iPad to the Garmin? Would it be through a USB hub?
I do this: I use Komoot on my iPhone and create all routes there. No monthly payment needed … so far.. A big step up from my old device having on-device WiFi The recorded rides automatically upload while I park my bike in the garage as soon as it sees my home WiFi.
I tried to connect my Edge to the Connect Garmin website on my Macbook. I found this page for assistance. Looking at getting the and this review was really helpful. My question is I noticed this review was written in April of last year. Is Garmin expected to release another version in the next few weeks?
My brain, however, tells me that Garmin is less expensive, has more features, and will work best with my Tacx Neo trainer. I decided on the over wahoo last year. Personally I prefer all uploading and downloading via WiFi rather than Bluetooth and can use phone hotspot for that if needed. Battery life is exceptional compared to older devices.
At first I was sceptical about the auto screen brightness being a battery drain. The deal breaker was wanting north up always on the map. Thank you for your comment. You provided exactly the feedback that I was looking to read. I just order my self element bolt on the end. My garmin has 3 years now and battery sucks. And i dont need maping a lot,mainly training and battery is my priority.
Paul Thank you for your detailed comment. The smaller one will be the base maps and of no interest. The larger one called gmapsupp. The only seems to support this file name for maps. You can have two though, one on the Edge and another in the SD card. The Edge is a bit more versatile. These then appear in the menu when you start up the device. Seeing as the has something around 14Gb of storage you can load a lot of map files to test them out.
The OSM maps are fine but i find them a bit cluttered on screen for fast road cycling. While there are some settings that fiddle with the detail the pure roads and some major scenery of the City Navigator maps is my prefered choice for fast road. The OSM style is great for touring or walking though and activity profiles can have different default maps.
If you travel somewhere else in the world you can get the OSM files from somewhere on the internet and just upload for the duration. All pretty easy via a PC. This is a designed in force storage mode. Paul Thanks again — this all worked very smoothly — was able to transfer my Europe map from my old perfectly. To start with: these in-depth reviews are simply great and give answers to almost all your questions before even asking them. A big thinks! In other words, will Garmin Connect combine and act like a sort of hub all data and display it on my watch, or will I not see the ride-related data on my watch if I log it with the Edge ?
It never merges the two properly for me, but maybe a settings problem? Edge issues. I recently purchased the Edge I have some issues with workouts, specifically intervals. I have downloaded a specific interval workout from Garmin connect into the However, on the Edge after the interval session ended a message appeared that the workout is completed, and prompted you to save it. The timer stopped with the completion of the last section of the workout.
This is the way it is supposed to be, and would have expected it to be on the new unit. On a chat session regarding this issue the Garmin rep told me that the way the works is the way it is suppose to, and all Edges work! When you download the workout data in to Garmin connect, and select the interval tab the Normalized power and the left-right balance data is missing from the individual intervals sections.
This issue did not happen in the Edge I have tested various interval workouts, and all show the same result. I have spoken to Garmin regarding these issues, sent the workout files, and videos of issue 1. On issue 2 I was told that it had been reported before. After calling Garmin and sending the files and videos still waiting for an answer.
Looks like I have to go back using the Any info on these issues will be appreciated. Maybe someone can help me with. I am trying to see my torque value with the Garmin , however I am not able to produce it. Any suggestions? Are there any apps out there that allow me to see all the metrics the P2M NG powermeter shows? And did you toggle the torque effectiveness option within settings on the power meter under sensors?
I connected to the PM via their app and noticed torque effectiveness was turned off. I did turn it on and gave it a test. Is there any way to disable virtual partner on the map screen when following a course?
It is completely useless to me, and it takes up valuable screen space. I like to look at the map screen while following a course and not have those dumb arrows blocking the map. Any solution to remove? Thank you! It will always have a screen for the virtual partner. The more people we get added, the better chance we have of it being implemented.
Do you think if you mount a computer on the top tube of the mountain bike, near the stem, would the accuracy be affected when riding downhill with your chest lower to the bars? Thanks Ray for your review, it helped me to choose this device over Wahoo Bolt.
I can change only to courses which are already saved on the device, or point to a place on a map and then Edge will calculate my route, as mentioned in the review. Does Wahoo have this feature? Hi — is there an answer to whether the virtual partner can be turned off on the please?! Virtual partner does not show up for me as an option under the data screens menu. Are you sure you have that on the ?
Yes, the E does support it. It is possible the menu items may shift a bit depending on the firmware version, but it all should be in there somewhere with the latest version. When in doubt, make a copy of your favorite Activity Profile and then experiment with that.
Hi Ray, Can you hear the beeper when the unit is on an out-front mount? I have a plus right now and the beeper is almost inaudible unless I mount it on the stem. I guess the speaker is pointed down. Well, I returned my because of low beep volume. Luckily, the Bolt that I was going to replace it with now supports the Varia Radar and the beep is loud enough.
Thanks Erick. I have the Wahoo and recently purchased the Edge Explore, but could barely see the Edge screen in average daylight conditions. Is the improved in this regard?
By using the auto screen brightness, it reeds perfect in all conditions. Both the data screens as the navigation map. Also when sending Komoot routes to the it only receives the waypoints but not the routes in between and tries to figure its own routes which is not helpful. I have a largely been unsuccessful using courses with my E and E On one hand, they must work for the majority of users or the number of complaints would be higher.
All my test courses are in areas that ought not challenge GPS signals. The resulting track looks correct after the ride. Tried short courses and long courses.
Hi, i was riding with my friends together with roadbikes and we noticed we are pretty ofter asking what the heart rates and watts are to make sure excersise is good for all. Is there any app for Garmin edge so that each of us would see real time those datas from other rides on the same ride?
That kind of data would make rides even more collaborative. Ray have you ever seen where a Garmin device appears twice in the Bluetooth device of an Iphone 11 in my case and this seems to cause either phone notifications not to work occasionally and causes the auto sync of an activity not to work at all? I have a new and a new Iphone where I cannot get activities to sync between the phone and the garmin unless I forget the device on both and repair.
This is a replacement Iphone as the other was having the same issue. Should the garmin appear twice in the device list? Yes thats not unusual. The establishes two connection. Last weekend we went for a ride away from home.
As the start point was on a busy roundabout we could not park there so we parked the car a few Kilometers further up the road along the same gpx route, unloaded the bikes and started there. Unfortunately for most of the ret of the ride the wanted me to turn around and go back to the start point.
This got so annoying I had to switch it off. Does anyone know how to start a circular ride anywhere other than the start point in the GPX file? How to pick in on a circular ride without starting at the start point. When the Garmin asks me to navigate to the start, I say no. What I need to know though, Does the power itself on when you unplug it from charging? That always drove me bonkers with my Just get the dashes in that field. I know there is a setting somewhere to correct this?
Does anyone know how to get the distance and speed to record when using the the Indoor profile? I use a Wahoo Kickr. I used to have a and it registered the speed and distance when I was indoor, but it had connectivity issues. The instruction manual states, the device includes an indoor activity profile where GPS is turned off. When GPS is turned off, speed and distance are not available unless you have a compatible sensor or indoor trainer that sends speed and distance data to the device. Any help would be appreciated.
0コメント